Marshall electronic V-R70DP - Manual (Page 3)

Optional Accessories (continued)
Battery Adapter
V-DV-PWR1
Uses 2 Sony DVCam/HDV FP-Type batteries.
When used with monitor power supply, you
can charge batteries plus operate monitor
V-mount to Anton Bauer adapter
V-ABA-01
Use to power Marshall Electronics monitors that have V-
Mount plate with Anton Bauer Gold Mount battery.
Sequential 2 channel charger
IDX-VL-2Plus
2-channel sequential charger with a built-in 60W power sup-
ply. Charges 2 ENDURA E series batteries in fewer than 5
hours. One 10’ XLR cable included. Weighs only 2 lbs
Sequential 4 channel charger
IDX-VL-4
Economically charges 4 ENDURA E series batteries in
under 6 hours using Full Power Charge (FPC) method
Simultaneous 4 channel charger
IDX-VL-4S Charges 4 ENDURA E series batteries in 2.5 hours or less
55 W Lithium Battery IDX-E7S V-Mount battery pack with 3 LED power Indicator
55 W Lithium Battery
with Power Link
IDX-E7 V-Mount Battery Pack with PowerLink includes accurate
Power Status Display and supports Digi-View
82 W Lithium Battery IDX-E10S V-Mount battery pack with 3 LED power Indicator
82 W Lithium Battery
with Power Link
IDX-E10
V-Mount Battery Pack with PowerLink includes accurate
Power Status Display and supports Digi-View
Digital to Analog Converter BC-0301-10 Converts SDI to analog Composite
Mounting Plate Attaches to any side for mount to ¼-20 threaded component
Cleaning Wipes V-HWP-K
Package of 10 non-toxic, antistatic, alcohol and ammonia
free cleaning wipes.
Marshall Electronics 3