Marmitek GIGACAM 4 - Manual (Page 5)

3. Connect the power adapter to the camera (6) and plug the adapter into a wall socket.
4. The channel indicator (3) will blink once, twice, three or four times to indicate which
channel it is set to (Channel 1 = once, Channel 2 = twice, etc.).
5. RECEIVER
1. ON/OFF switch
2. Power indicator
3. Channel indicator
4. AV output cable with Scart plug
5. 2.4 GHz antenna
6. AV input (Scart)
7. Connection for the power adapter
8. Setting for channels and switch time
5.1. HOW TO ACTIVATE THE RECEIVER
1.
Screw the 2.4 GHz antenna, included in the set, into the back of the receiver. Place the
antenna in an upright position.
5 GIGACAM 4