Meyer equip ment wheel torque 60, Tire in fla tion 60, 8720/8865 spreader w/ brakes tire wheel torque 60 – Meyer 8720 User Manual
Page 60: Meyer equipment wheel torque, Tire inflation, 8720/8865 spreader w/ brakes tire wheel torque
Model 8720/8865
-60-
MEYER EQUIPMENT WHEEL TORQUE
BOLT/STUD
SIZE
SOCKET
SIZE
PRESS FORMED
WHEEL CENTER
BOLT
TYPE
HEAVY DUTY
WHEEL CENTER
½
3/4
80 ft lbs
Lug Bolt
85 ft lbs
9/16
7/8
80 ft lbs
Lug Bolt
120 ft lbs
5/8
15/16 / 1-1/16
100 ft lbs
Bevel or Flange
Nut
160 ft lbs
3/4
1-1/8 / 1 ½
Flange Nut
378 ft lbs
TIRE INFLATION
TIRE SIZE
PLY
PSI
11L-15
8
36
12.5L-15
8
36
12.5L-15
12
52
14L-16
12
44
16.5L-16
10
36
19LX16.1
10
32
21.5L-16.1
18
44
11R/22.5
used truck
75
425/65X22.5
used truck
75
28L-26
16
28
8720/8865 SPREADER W/ BRAKES TIRE WHEEL TORQUE
•
Clean adjoining surfaces
•
Start nuts to bring wheel and brake drum flush to hub mounting surface.
•
Avoid brake drum and/or wheel binding on hub.
•
Install remaining wheel nuts. Torque to 50 ft-lbs. Then re-torque to 450-500 ft-lbs
(22mm) or 265 ft-lbs (3/4”).
•
Re-torque wheel nuts after 50-100 miles.
•
Check wheel nut torque every 10,000 miles and re-torque as necessary.
CAUTION:
THESE INSTRUCTIONS ARE NOT COMPLETE. READ AND FOLLOW ALL PROCEDURES
IN USER’S GUIDE TO WHEELS AND RIMS BY “THE MAINTENANCE COUNCIL” #T0410. IF YOU HAVE
QUESTIONS CALL WALTHER ENG. & MFG. COMPANY INC. (937)847-2700.