Meyer 8720 - Manual (Page 4)

INTRODUCTION
Congratulations on your purchase of a new Meyer farm
equipment product. Undoubtedly you have given much
consideration to your purchase and we’re proud that you
have selected Meyer. Pride in craftsmanship, engineer-
ing and customer service have made Meyer products
the finest in the farm equipment industry today.
There is no substitute for quality. That is why thousands
of people like you have purchased Meyer farm equip-
ment. They felt it was the best equipment to serve their
farming needs, now and in years to come. We ask that
you follow our policy of “safety first,” and we strongly
suggest that you read through the owner’s manual be-
fore operating your Meyer farm equipment.
Meyer Manufacturing Corporation wants to thank you
for not compromising quality. We are determined to offer
excellence in customer service as well as provide you
with the very best value for your dollar.
REMEMBER:
FARM EQUIPMENT BUYERS
TRUST THE NAME MEYER!
Sincerely,
All Employees of
MEYER MANUFACTURING CORPORATION
Meyer Mfg. Corp. reserves the right to make improve-
ments in design, or changes in specifications at any
time, without incurring any obligation to owners of units
previously sold.
This supersedes all previous published instructions.
IMPORTANT:
At the front of this manual is a Product Registration and
Inspection Certificate. Be sure your dealer has com-
pleted this certificate and promptly forwarded a copy to
Meyer Mfg. to validate the manufacturer’s warranty. The
product model and serial number are recorded on this
certificate and below for proper identification of your
Meyer Industrial Spreader by your dealer and the manu-
facturer when ordering repair parts. The serial number
plate is found on the upper left front corner of the
spreader tank or stamped in the left front frame channel.
Model No. _____________________________
Serial No. _____________________________
Date of Purchase ______________________
At the back of this manual is the repair parts section. All
replacement parts are to be obtained from or ordered
through your Meyer dealership. When ordering repair
parts, refer to the parts section and give complete infor-
mation including quantity, correct part number, detailed
description and even Model No. and Serial No. of the
Meyer Industrial Spreader which needs repair parts.
Model 8720/8865 -4-
NOTE: All references to right hand (RH), left hand (LH),
front and rear apply to the product as viewed from the
rear of the spreader.