Microsoft Windows CE A2xx - Manual (Page 5)

User's Guide for A2xx with WinCe Build # 5 0
1 About This Guide
This documentation presents step-by-step directions to run the Windows CE Thin Client. For your
convenience there are a few remarks about handling the dialog boxes:
The dialog boxes are equipped with the buttons OK and ☒ in the upper right corner. To apply /
save modifications you have to click OK. Alternatively press ENTER which both saves the
modifications and closes the dialog at the same time. Click on
☒
only or press ESC to close the
dialog without modifications to apply.
1.1 Keyboard Shortcuts
In general, the Windows keyboard shortcuts can be used, such as:
CTRL+TAB Move forward through tabs.
CTRL+SHIFT+TAB Move backward through tabs.
SPACEBAR Select or clear the check box if the active option is a check box.
ENTER Carry out the command for the active option or button, alternative for the
click on OK and
☒.
ESC Cancel the current task rsp. close the dialog box without saving
modifications.
1.2 Hotkeys
The Task hotkey enables you to switch between currently open applications or “tasks”.
CTRL + ALT + : Left selection in the Applications bar
CTRL + ALT + : Right selection in the Applications bar
The terminal password authorization hotkey re-enables disabled settings.
CTRL + ALT + Pos1 (HOME)
The terminal password has to be entered.
To show the Starter window (Terminal Connection Manager) on top of other windows:
CTRL + ALT + End
Holding the Shift key during boot, the device starts in VGA mode.