Marmitek MEGACAM4 - Manual (Page 6)

2. Connect the power adapter to the receiver and plug the adapter into a wall socket.
3. Connect the receiver to your TV as shown below.
You can connect another device (DVD, VCR, satellite receiver, etc.) to the input (6) on your
receiver. If you switch off the receiver with button (1), the image of your device will be
shown. If you switch on the receiver, the image of your device will disappear and the camera
image will be shown.
The factory setting of the receiver is Channel 1. The switch for the channel setting can be
found on the back of the receiver (8).
6 MARMITEK
AV output of
your device
Scart cable
Receiver
AV input
AV output. To the Scart
input of your TV
AV device