Marantz PMD620MKII - Manual (Page 52)

40
5.
Press the 1/3/ENTER button to store the Out point.
“Copy Segment?” is displayed.
6.
Press the 1/3/ENTER button to start the copy process.
“Executing...” will be shown on the display.
When the copy procedure is completed, the display will show
“Completed” for 1 second and then returns to stop mode with
your new file as the current file.
Notes:
• When a copy area spans across two or more files, a file is connected and
copied.
• When the copy area spans across files of different “Rec Format” or “Rec
Channel” setting, it can not copy.
• The copy area can not exceed 80 minutes.
Key Lock
Slide the Key Lock switch to lock the keys.
The key lock secures the PMD620MK II in the state it is in during
recording, playback or stop.
During Record and Rec-Pause mode, the POWER switch is
always invalid.
POWER KEYLOCK REC L
Notes:
• If “Key Lock” setting is All, only the optional remote controller RC600PMD
is accepted.
• If “Key Lock” setting is Partial, the REC, REC PAUSE and STOP/
CANCEL buttons on the panel, and RC600PMD are accepted.
Setup the “Key Lock” of the preset menu. (
v
P.65)
• “Key Locked” is displayed for 1 second when the key is
pressed during key lock.