Meyer Sound PSW-2 - Manual

for equipment racks. The
PSW-2 is compact for efficient
transport and setup.
The PSW-2 power supply
incorporates the Intelligent
AC ™ system, which performs
automatic voltage selection,
EMI filtering, soft current
turn-on, and surge supp-
ression. Simply connect
a signal source and plug into
power anywhere worldwide,
and the unit is fully oper-
ational. The amplifier unit
is equipped with TruPower ™
Limiter technology, which
maximizes speaker protection
reliability and component life.
This breakthrough in speaker
control also results in higher
The PSW-2 from Meyer Sound
is a self powered, dual-
amplified, 4th order, bass-
reflex subwoofer which
is arrayable and flyable (with
optional rigging). The
dimensions of its trapezoidal
cabinet are identical to those
of the MSL-4. The unit
incorporates twin 15” drivers,
has a frequency response of
35 Hz to 120 Hz, and is
phase-corrected.
The amplifier, controller,
power supply, and cooling
subsystems are integrated into
a lightweight module, service
accessible at the back of the
enclosure. Self-contained
electronics eliminate the need
FEATURES
SPL at all frequencies, and
increased available headroom.
Long term power compression,
typically 3-6 dB in conventional
systems, is less than 1 dB.
Maximum SPL capability
remains constant even during
operation at high levels for
extended periods.
PSW-2 performance can be
supervised using the Remote
Monitoring System ™ (RMS). This
enables users at a computer
terminal to monitor such
parameters as limiting activity,
power output, voltage,
temperature, fan speed,
and driver status.
Self Powered Reinforcement Subwoofer
PSW-2
Arrayable and flyable
subwoofer
Arrayable with MSL-4
(identical cabinet
dimensions)
Compact for efficient
truck packing
No amp racks
Integrated control
electronics, and amplifiers
TruPower ™ Limiting
Intelligent AC ™
Compatible with the
Remote Monitoring
System
™ (RMS)
Meyer
Sound
Superior
engineering
for the art
and science
of sound.