Miller Electric XLix - Manual (Page 9)

Page 7
Adjusting Headgear
XLi Models
.
There are four headgear ad-
justments: headgear top, tight-
ness, angle adjustment, and
distance adjustment.
1 Headgear Top
Adjusts headgear for proper depth
on the head to ensure correct bal-
ance and stability.
2
Headgear Tightness
To adjust, push in the adjusting
knob located on the back of the
headgear and turn left or right to de-
sired tightness.
.
If adjustment is limited, it may
be necessary to remove the
comfort cushion.
3 Angle Adjustment
Three slots on the right side of the
helmet position the forward tilt of
the helmet. To adjust, loosen the
right outside tension adjustment
knob then lift up on the inside tab
and slide to the desired hole. Re-
tighten tension adjustment knob.
4
Distance Adjustment
Adjusts the distance between the
face and the lens. To adjust, loosen
both outside tension knobs and
slide forward or back to desired
position and retighten. (Both sides
must be equally positioned for
proper vision.)
804 119
1
2
4
3