Mellerware VAC14001400W User Manual
Page 4
Operation Method:
Hose
connector
Extension tube
Sliding block
Cable rewinder
button
Dust full
indicator
Switch
Floor tool
Swivel
1.
Insert the hose connector
into the swivel of the vacuum
cleaner.
4.
7.
2.
Insert the handle into the tube
with a twisting force.
5.
8.
1) Pull out the cord as long as you
need, but do not exceed the mark
of red and yellow.
2) Hold the plug when rewinding,
you can press the button with your
foot to retract the cable into the
machine.
If the red buoy of the dust indica-
tor moves into the middle of the
small window, please check if (A)
the dustbag is full, or (B) has been
blocked up somewhere.
(A) Replace or clean the dustbag.
(B) Please solve as soon possible.
You can adjust the airflow by
pushing the sliding block up
and down.
Use the On / Off button to
switch the appliance on
and off.
Standing / Vertical Positions:
The floor tool may be attached
to the appliance by fixing the tool
to the designated slot.
3.
6.
9.
Handle
Extension tube
Extension tube
VAC1400_IM.indd 4
VAC1400_IM.indd 4
2010/12/01 11:54:41 AM
2010/12/01 11:54:41 AM