Measurement Specialties PCI-DIO24 - Manual (Page 17)

Declaration of Conformity
Manufacturer: Measurement Computing Corporation
Address: 10 Commerce Way
Suite 1008
Norton, MA 02766
USA
Category: Electrical equipment for measurement, control and laboratory use.
Measurement Computing Corporation declares under sole responsibility that the product
PCI-DIO24
to which this declaration relates is in conformity with the relevant provisions of the following standards or
other documents:
EC EMC Directive 2004/108/EC: General Requirements, EN 61326-1:2006 (IEC 61326-1:2005).
Emissions:
 EN 55011 (2007) / CISPR 11(2003): Radiated emissions: Group 1, Class A
 EN 55011 (2007) / CISPR 11(2003): Conducted emissions: Group 1, Class A
Immunity: EN 61326-1:2006, Table 3.
 IEC 61000-4-2 (2001): Electrostatic Discharge immunity.
 IEC 61000-4-3 (2002): Radiated Electromagnetic Field immunity.
 IEC 61000-4-4 (2004): Electric Fast Transient Burst Immunity.
 IEC 61000-4-5 (2001): Surge Immunity.
 IEC 61000-4-6 (2003): Radio Frequency Common Mode Immunity.
 IEC 61000-4-11 (2004): Voltage Interrupts.
To maintain compliance to the standards of this declaration, the following conditions must be met.
 The host computer, peripheral equipment, power sources, and expansion hardware must be CE
compliant.
 All I/O cables must be shielded, with the shields connected to ground.
 I/O cables must be less than 3 meters (9.75 feet) in length.
 The host computer must be properly grounded.
 Equipment must be operated in a controlled electromagnetic environment as defined by Standards EN
61326-1:2006, or IEC 61326-1:2005.
Declaration of Conformity based on tests conducted by Chomerics Test Services, Woburn, MA 01801, USA in
March, 2009. Test records are outlined in Chomerics Test Report #EMI5299.09.
We hereby declare that the equipment specified conforms to the above Directives and Standards.
Carl Haapaoja, Director of Quality Assurance