Section 2: installation, Before you begin, Enterprise users – Motorola WPCI810G User Manual
Page 11
WPCI810
2-1
Section 2: Installation
Before You Begin
You need to collect information so that you can set up your WPCI810 correctly. Depending
upon where you are connecting, the type of information required is divided between
business (enterprise users) and home settings (small office/home office).
Also, you need to consider the type of security to enable for your wireless connection. A
discussion of the types of security available follows this section.
Enterprise Users
Obtain the following information from your network administrator:
Network names (SSID) of the specific wireless networks to which you are going to
connect.
WPA (Wi-Fi Protected Access) wireless network key information (may include network
authentication type, encryption type, network key) for any WPA-enabled networks to
which you want to connect.
WEP (Wired Equivalent Privacy) wireless network key information (network key) for any
WEP-enabled networks to which you want to connect.
For
Microsoft
®
Windows
®
networking, the customer name and workgroup name.
For a network account, the domain name, a user name, and password.
An IP address (if not using a DHCP server).
Networks connected to an authentication server, if any.