Mitel M2008 - Manual (Page 11)

Making and Answering Calls
Speed Call Keys
You may use Speed Call Keys to make a call or to send a string of digits during a call
(press a Speed Call Key during a call to send a multi-digit password, for instance).
Note: Programming a Speed Call key deletes any previously programmed feature or speed
call for that key.
To dial a stored Speed Call number:
1. Lift the handset.
2. Press a Speed Call key.
To store a Speed Call number:
1. Press SUPERKEY.
2. Press a personal key that isn't a line appearance key.
3. Press * (Change).
4. Press * (Yes).
5. Do one of the following:
•
To enter a new number, dial the number. Press HOLD between digits to create
a pause during dialing; press HOLD more than once to lengthen the pause.
•
To enter a trunk flash, press TRANSFER. (See transfer on page 14 for more
information about the use of this feature.)
6. Press * (Save).
7. Press the selected personal key.
8. If you want to make the number private, press * (Yes). Otherwise, press # (No).
9. Press SUPERKEY to exit, or press a personal key to program another speed call
number.
Speed Call - Personal
Note: Personal Speed Call lists must be configured by the Administrator.
To store a personal Speed Call number:
1. Lift the handset.
2. Dial 67.
3. Enter an index number between 00 and 09.
4. Dial the number to be stored.
5. Hang up.
11