Memorex MVDP1083 - Manual (Page 29)

28
BASIC OPERATION (CONTINUED)
While playing a DVD, press the DISPLAY
button to cycle as follows:
1st press: Title elapsed time
2nd press: Title remaining time
3rd press: Chapter elapsed time
4th press: Chapter remaining time
5th press: Display off
1
2
1
While playing a CD, press the DISPLAY
button to cycle between single elapsed time
and single remaining time.
1
2
2
DISPLAY BUTTON
Press this button repeatedly to select between
Interlace or P-Scan (Progressive Scan).
Interlace: To see the image through the built-in
screen or through an external TV using the Video
Cable.
P-Scan (Progressive Scan): The built-in screen
will turn off and you can only see the image through
an external TV (the TV must be compatible with
Progressive Scan signal) using the Component
Cable.
NOTE: For the Component Output connection, if
your TV is not compatible with the progressive scan
signal, set the Component setting to YUV and set
the TV Mode setting to Interlace as described on
page 23.
1
1
I/P (INTERLACE/PROGRESSIVE) BUTTON