Memorex MX4501 - Manual (Page 12)

11
Press the POWER button to turn
the unit on; the display will light
brightly. 1
1
Press the STOP button to stop the
playback, then press the Open/Close
button and insert a CD onto the top
spindle.
NOTE: If a CD is already playing, that
CD spindle will not eject, it will remain
in the unit. To eject all the CD spindles,
press the STOP (
■
) button before
pressing the Open/Close button.
Push Back &
Pull Out Areas
3
Press the FUNCTION button
repeatedly until CD is selected;
one of the disc indicator will blink
and the other disc indicators will
light. Then the unit will start
playback the discs automatically
(If there are discs in the trays).
1
2
Press a Disc button (1 through 5)
to select a disc and it will
automatically start playing.
NOTE: The respective disc
indicator will light when a disc is
inserted, blink when the disc is
playing. If there is no disc on the
selected spindle, that Disc
indicator will turn off and the unit
will skip to playback the next disc.
1
6
To insert more CDs, insert a disc
in the top spindle, then slightly
push the Push Back & Pull Out
area to push back the top spindle
to the unit. Then, insert another
CD. Repeat this step for up to five
CDs.
Push Back &
Pull Out Areas
4
Press the Open/Close button to
close the CD tray. The first disc
will automatically start playing.
2
5
Adjust the BASS BOOST button
❶
and VOLUME control
2
as
desired. Playback will continue
until all the tracks on all the discs
have played.
2
1
7
To stop playback before the discs
end, press the STOP (
■
) button.
The disc will stop and the display
will show the total number of
tracks on the selected disc.
1
8
PLAYING COMPACT DISCS
This unit can play standard, single or CD-R CDs.
OPERATING INSTRUCTIONS (CONTINUED)