Motorola DROID XYBOARD 8.2 - Manual (Page 9)

FI
RST
ST
EP
S
7
Caution: Power off the tablet before removing the SIM card. If you remove a card while the
tablet is powered on, you may lose data.
When you plug in a charger, your tablet turns on. If you have a low battery, the Charging Light
shows until your tablet can turn on. When your tablet is on, touch the battery icon in the
bottom right of the display for detailed charging status.
Note: The battery should only be replaced by a Motorola-approved service facility. Any
attempt to remove or replace your battery may damage the product and void your warranty.
This product meets the applicable limit for exposure to radio waves (known as SAR)
of 1.6 W/kg (FCC & IC). The limits and guidelines include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health. The
highest SAR values measured for this device are listed in the regulatory information
packaged with your product.
STARTUP
1 Press and hold Power/Lock on the back of your tablet to turn it on.
2 If desired, change the language setting, then touch Start .
When you touch Start , your tablet attempts to activate your mobile service (if not already
activated).
3 If you go on to Wi-Fi setup, you see a Wi-Fi setup screen. Connect to an existing network,
add a new network, or skip Wi-Fi setup for now and set up later (see “Wi-Fi” on page 15).
4 Choose location settings and touch Next (for the most accurate location features, check
both services).
5 Follow the setup wizard to create or log into your Google™ Account and go to the home
screen.
Record your Google Account information for future reference.
Username: ________________________________________________________