Motorola CENTRACOM 6880801D90-D - Manual (Page 49)

Elite Admin Configuration 5-5
Specifying Message and Status Codes
This section defines Message and Status Codes and their formats.
1. Selecting the Message check box enables selection of radio
buttons for either All Message Codes or Message Codes* as shown
above. Selecting the radio button for All Message Codes will
monitor all available message codes. Selecting the Message
Codes* radio button enables the text box where one or more codes,
or a range of message codes, can be specified to be monitored.
2. Selecting the Status check box enables the choices for monitoring
All Status Codes, or one or more or a range of Status Codes* as
entered in the neighboring text box.
3. Clicking Next moves to the Sorting dialog window.
Code Formats
Codes can be specified either with a range of two numbers using the dash
between them, or as numbers followed by a comma. For example where
a range of 2-6 is typed the result is 2, 3, 4, 5, 6. The numerical order that
Codes are entered is ignored and automatically arranged sequentially.
6880801D90-D 6880801D90-D