MITSUBISHI ELECTRIC WD-73827 - Manual (Page 28)

28 Chapter 2. Connecting
Connecting a DVD Player with Component Video
Connecting a DVI Device
DVD Player with Component Video
Figure 9
Component video cables and audio cables are required.
These are not included with the TV.
1. Connect the Component Video cables from Y/Pr/
Pb VIDEO OUT on the back of the DVD player to
COMPONENT-2 on the TV back panel, matching the
correct connection:
• Y to Y (Green)
• Pr to Pr (Red)
• Pb to Pb (Blue)
2. Connect a set of audio cables from AUDIO OUT
on the back of the DVD player to COMPONENT-2
AUDIO Input on the TV back panel. The red cable
connects to the R (right) channel, and the white cable
connects to the L (left) channel.
$0.10/&/5 :1C1S
JQQJ
*/165
 
47*%&0
7*%&0
"6%*0 -&'5 .0/0
"6%*0 3*()5
%57$"#-& 7)'6)'
%*(*5"- "6%*0 065165 $BCMF$"3%™
64&
8*5)
"/5


$"3%
501
 2
:
1C
1S
"6%*0 -&'5 .0/0
"6%*0 3*()5
065165
"6%*0 065165 3&$03%
065165 %7* "OBMPH
"VEJP
  7*%&0
AUDIO- LEFT/ (MONO)
"6%*0 3*()5
.0/*503-*/,™)%.* 7*%&0
JQQJ "6%*0
1$.
-*/&"3
 
*&&&

*/165 065165
/FU
$PNNBOE *3
&.*55&3 ¸
(-JOL ¸

*/165
1$
'03
)%.*
 0/-:

)[ 7("

87("
47("

847("
9("


9

64&
8*5) $BCMF$"3%™
"/5


."*/ "/5


"69
.0/*503-*/,™ $0/530-34$
7*%&0
4
:
$#
$3
7*%&0
065
#*5453&".1$. 
$)
463306/% $)
-
3
$&/5&3
46#800'&3 463306/% '30/5 $0"9*"- 015*$"-
"6%*0
065 "$
*/ .*546#*4)*
%7%
1-":&3 .0%&- %%
108&3
4611-:












7_
)[ 108&3
$0/46.15*0/












8
.*546#*4)*
%*(*5"-
&-&$530/*$4 %*453*#65&%
#:

+&30/*.0
30"% *37*/&

$"

."%&
*/
+"1"/
".&3*$"

*/$
4&3*"-
/0 ."/6'"$563&%




%7%
1MBZFS
57
#BDL
1BOFM
3FE
8IJUF
8IJUF
3FE
Figure 9. Connecting a DVD Player with Component
Video
Note: NetCommand® assumes you connected your
DVD player to Component-2. If you add a second DVD
or use any other inputs for your DVD, this change must
be reflected in the NetCommand system. See Edit
NetCommand... in Chapter 3 for more information.
IMPORTANT
See Appendix A for component video signal
compatibility information.
For digital audio connections to your A/V
receiver, see your DVD player and A/V
receiver Owner’s Guides.
DVI Device
Figure 10
A DVI-to-HDMI cable or DVI/HDMI adaptor and HDMI cable and
audio cables are required. These are not included with the TV.
They may be available at your local electronics retailer.
1. Connect the DVI-to-HDMI cable (recommended) or
HDMI cable with DVI/HDMI adaptor from the DVI
device’s back panel to the TV back panel.
NOTE: If you are using a DVI/HDMI adaptor, it is
important to connect the adaptor to the DVI device for
best performance.
2. Connect a set of audio cables from AUDIO OUT on
the DVI device back panel to the INPUT/DVI Analog
Audio on the TV back panel. The red cable connects
to the R (right) channel, and the white cable connects
to the L (left) channel.
NOTE: The HDMI connection supports copy
protection (HDCP). Some devices require connecting
to an analog input first, in order to view on-screen
menus and select DVI as the ouput. Please review
your equipment instructions for DVI connectivity and
compatibility.
3
-
"6%*0
065
$0.10/&/5 :1C1S
JQQJ
*/165
 
47*%&0
7*%&0
"6%*0
-&'5 .0/0
"6%*0 3*()5
%57$"#-& 7)'6)'
%*(*5"- "6%*0 065165 $BCMF$"3%™
64&
8*5)
"/5


$"3%
501
 2
:
1C
1S
"6%*0
-&'5
.0/0
"6%*0
3*()5
065165
"6%*0
065165
3&$03%
065165 %7* "OBMPH
"VEJP
 
7*%&0
AUDIO-
LEFT/
(MONO)
"6%*0 3*()5
.0/*503-*/,™)%.* 7*%&0
JQQJ "6%*0
1$.
-*/&"3
 
*&&&


*/165
065165
/FU
$PNNBOE
*3
&.*55&3 ¸
(-JOL ¸

*/165
1$
'03
)%.*
 0/-:

)[ 7("

87("
47("

847("
9("


9

64&
8*5) $BCMF$"3%™
"/5


."*/ "/5


"69
.0/*503-*/,™ $0/530-34$
%7*
%FWJDF


%7*UP)%.*
$BCMF

57
#BDL

1BOFM

Figure 10. Connecting a DVI Device