Microsoft 120 GB Hard Drive - Manual (Page 7)

en
gli
sh

if you’re already using a 20-GB Xbox
360 Hard drive, see “Transfer content
From an existing Hard drive” before
attaching your 120-GB hard drive.
To attach your hard drive:
1 Turn off your console.
2 remove the hard drive bay cover
from your console.
3 Position the hard drive over the
hard drive bay with the thin end
(the front) pointed toward the
front of the console and the thick
end (the back) pointed toward the
back of the console.
4 Place the back of the hard drive
against the back of the hard drive
bay. Make sure the ridge along
the back of the hard drive rests
beneath the lip on the back of the
hard drive bay.
5 Push the front end of the hard
drive down until the tab clicks.
To remove your hard drive:
1 Turn off your console.
2 Press the tab on the front of the
hard drive and lift the unit from
the console.
IMPORTANT
avoid touching hard drive bay
contacts or hard drive connector
contacts with fingers or metal
objects.
ATTACH AND REMOVE YOUR HARD DRIVE
X136898501mnl.indd 7 3/16/2007 2:17:57 PM