Melissa 271-002 - Manual (Page 10)

To get the best out of your fan, please read these
instructions carefully before using it for the first
time.
We also recommend that you keep the
instructions for future reference, so that you can
remind yourself of the functions of the fan.
OVERVIEW OF FUNCTIONS
1. Rear cage
2. Oscillation button
3. Front cage
4. Stand
5. Height adjustment screw
6. Base
IMPORTANT SAFETY MEASURES
Please ensure that the voltage of the fan
corresponds to the mains voltage.
-
Use the fan only for the purpose(s) defined in
the user guide.
- Never insert your fingers, pencils or other
objects through the fan cage during
operation.
- Switch the fan off before moving or cleaning.
- The fan should be set up on a stable and
level surface to avoid it being knocked over.
- Do not expose the fan to excessive heat or
humidity, as this can cause damage to the
electrical components.
- Do not immerse in any form of liquid.
- It is not advisable to expose people, in
particular babies and the elderly, to a
continuous stream of cold air.
- The fan should be kept out of the reach of
children.
- Ensure that the cable does not get caught
beneath the device, in drawers, behind
shelves etc.
- Do not run the cable under carpets, rugs,
etc.
- Ensure the cable is kept away from busy
areas to avoid anyone tripping over it.
- Do not use if the device or cable becomes
damaged. Take it to a specialist for repair.
- For indoor use only.
SETTING UP THE FAN
- Remove the wing screw from the motor pin.
- Fit the rear cage onto the motor pin. Make
sure that the 2 holes on the motor match the
2 holes on the rear cage. Fit the wing screw
and screw it on firmly.
- Put the blade on the motor pin and carefully
tighten the screw.
- Fit the front cage onto the rear cage and fix
them together using the metal clips. Tighten
the small screw.
USE
The fan has 3 speed settings:
0 – Fan is off
1 – Lowest speed
2 – Medium speed
3 – Top speed
The fan can operate in oscillating or stationary
mode. Press the oscillation button to activate the
oscillating mode.
The height of the floor fan can be adjusted.
Loosen the screw to move the stand up or down
as required. Tighten the screw at the desired
position.
10
UK
1.
2.
3.
4.
5.
6.
271002_IM 25/02/04 12:56 Side 10