Mio pmn - Manual (Page 70)

5.8 Additional Programs
In addition to Microsoft software, your Pocket PC manufacturer may provide
additional programs to enhance your Pocket PC or facilitate your operation.
NOTE: Depending on the continuing developments of the product, the software supplied
with your Pocket PC may be changed or updated. If there is any difference between the
information in this manual and your product, the operation should be based on the product
you have.
SysInfo
SysInfo provides the following functions:
z
Restore your device to the factory default state.
z
Automatically lock your device when it turns off.
Tap Æ Settings Æ System Æ SysInfo . The tool consists of these tabs: System ,
Clean Boot , and AutoLock . They are described as below.
System
This screen displays the system information.
Clean Boot
Use this function if you want to restore your Pocket PC to the factory default
state. Restoring factory default state means all data you have entered in RAM,
including all files, system settings, and additional programs you have installed,
will be erased.
If Mio Map is pre-installed in your device, you have the option of keeping the
software. To perform a “Clean Boot,” tap
Start and follow the onscreen
instructions.
AutoLock
You may not want any accidental touching of the buttons to turn on your device.
This can happen when, for example, you put your device in a bag and something
else in the bag presses against your device.
62