Meridian America HD Video Processor DVP-2351 - Manual (Page 2)

DVP-2351
HD Video Processor
Technical specification
Video Inputs
• 2 Composite (NTSC/PAL/SECAM)
• 2 S-Video (NTSC/PAL/SECAM)
• 2 Component (YPbPr or RGB/S) processes
480i/p-60, 576i/p-50, 720p-50/60,
1080i-50/60
• 1 RGBHV/Component (BNC-style
connectors) processes 480p-60, 576p-50,
720p-50/60, 1080i-50/60, VGA-
SXGA@60Hz
• 4 HDMI (RGB or YCbCr) processes
480i/p-60, 576 i/p-50, 720p-50/60,
1080i-50/60, 1080p-24/25/50/60, VGA-
SXGA@60Hz
Audio Inputs
• 4 HDMI
• Assignable Coaxial Digital
• Assignable Optical Digital
• Assignable Analogue Pair (L/R)
Outputs
• Analogue Video Output (BNC), Configurable
for YPbPr, RGBHV, RGB/S, or RGB
• 1 HDMI, Configurable for RGB (4:4:4) or
YCbCr (4:4:4 or 4:2:2). Also carries digital
audio
• 1 Coaxial Digital Audio
• 1 Optical Digital Audio
Input Aspect Ratio
• Presets: 4:3 full frame, 4:3 letterbox,
Panorama, 16:9 full frame or user-defined
aspect ratio (10)
Flexible Horizontal and Vertical Zooming (up
to 2x) & Panning controls
Overscan Adjustment per input
Output Aspect Ratio
• Presets: 4:3, 16:9, 2.35:1 or custom output
aspect ratio
• Separate Display/Screen Adjustments
Underscan Adjustment to address overscan
inherent in some displays
Picture Controls
• Fully programmable controls with separate
non-volatile memories per input and input
resolution
• Brightness, Contrast, Saturation, Hue,
Sharpness, and Fine Y/C Delay Operation
• Intuitive On Screen Display and easy to read 2
line, 20 character Front Panel Display
Front Panel Controls, included IR Remote
Control (discrete codes available), Automation
via RS232 port
Output Controls
• Output Resolution, Sync Type, Colourspace
(RGB or YPbPr/YCbCr), Frame Lock, Gamma,
Display Profiles (10)
• 35 Built-in test patterns
Software Upgradeable via Serial Port
Infra-red remote included
Power
• Universal AC mains input: 100 – 240 VAC @
50-60Hz
• Consumption < 45W
• Sleep Mode – automatic 30 second timeout
indicated by power LED turning off
Dimensions
• 263 x 434 x 46 mm (10.4 x 17 x1.8 in)
without feet
• Standard 19” 1U 1.75” Rackmount option
Weight
• 12.2lbs (5.5kg)
MF10DS-ENG v2.2 • REƒ • P88351 • 2000306
Progressive Cadence Detection and high-
performance frame-rate conversion enables
24/48/72 and 25/50/75 Hz output from
film-based content, while 10-bit scaling is
performed up to 1080p.
An intelligent digital audio delay is employed
to ensure that audio and video timing are
correctly matched.
The unit also features four HDMI 1.3 inputs
that handle up to 1080p-24/25/50/60
and one HDMI out, THX Video certification,
ISFccc Day and Night modes, and two
programmable triggers. There are several
built-in aspect ratios including 4:3, LB,
stretch, 16:9 and also ten user-defined
modes.
Each input has its own overscan setting
and each of ten available profiles includes
underscan adjustment. Anamorphic
lenses like the Meridian Schneider 2.35:1
Cinemascope assembly are supported
directly.
The DVP-2351 also includes full-frame
timebase correction, and a multi-standard
full-performance video decoder supporting
10-bit 480/576i and 12-bit 480/576/720p
and 1080i.
The unit includes flexible digital and analogue
audio switching and routing with 4 digital and
one analogue audio inputs, all assignable in
addition to audio on the HDMI inputs, and
there are optical and coax S/PDIF digital
outputs as well as audio on the HDMI out.
DVP-2351 front and rear panels