Motorola XPR 4580 - Manual (Page 93)

Keyp
ad
Mic
rophone
Fe
atures
English
81
5 Press the PTT button to talk and release it to listen. The
RSSI icon disappears during transmission.
To enter extra digits, if requested by the Phone Call:
Press any keypad to begin the input of extra digits. The first
line of the display shows Extra Digits:. The second line
of the display shows a blinking cursor. Enter the extra digits
and press
N to proceed. The DTMF tone sounds and the
radio returns to the previous screen.
OR
Press One Touch Access button. The DTMF tone sounds.
If the entry for the One Touch Access button is empty, a
negative indicator tone sounds.
6 Press R to end the call.
If deaccess code was not preconfigured in the Contacts list,
the first line of the display shows De-Access Code:. The
second line of the display shows a blinking cursor. Enter the
deaccess code and press
N to proceed. The radio returns
to the previous screen.
7 The DTMF tone sounds and the display shows Ending
Phone Call.
8 If successful:
A tone sounds and the display shows Phone Call Ended.
Your radio returns to the screen you were on prior to
initiating the call.
OR
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Steps 6
and 7 or wait for the telephone user to end the call.
When you press PTT button while in the Phone Contacts
screen, a tone sounds and the display shows Press OK to
Place Phone Call.
When the telephone user ends the call, a tone sounds and the
display shows Phone Call Ended.
If the call ends while you are entering the extra digits requested
by the Phone Call, your radio returns to the screen you were on
prior to initiating the call.
NOTE: During channel access, press R to dismiss the call
attempt and a tone sounds.
During the call, when you press One Touch Access
button with the deaccess code preconfigured or enter
the deaccess code as the input for extra digits, your
radio attempts to end the call.
During channel access and access/deaccess code or
extra digits transmission, your radio responds to On/
Off button, Volume Knob, and Channel Rocker only.
A tone sounds for every invalid input.
The access or deaccess code cannot be more than 10
characters.