Motorola XPR 4580 - Manual (Page 88)

Keyp
ad
Mic
rophone
Fe
ature
s
English
76
9 Release the PTT button to listen. When the target radio
responds, the green LED blinks.
10 If the Channel Free Indication feature is enabled, you will
hear a short alert tone the moment the target radio releases
the PTT button, indicating the channel is free for you to
respond. Press the PTT button to respond.
OR
If there is no voice activity for a programmed period of time,
the call ends.
11 You hear a short tone. The display shows Call Ended.
Making a Phone Call by Manual Dial
Procedure:
1 S to access the menu.
2 P or Q to Contacts and press N to select.The
entries are alphabetically sorted.
3 P
or
Q
to Manual Dial and press
N
to select.
4 P or Q to Phone Number and press N to select.
5 The first line of the display shows Phone Number:. The
second line of the display shows a blinking cursor. Use the
keypad to enter a telephone number and press
N to
proceed.
If the access code was not preconfigured in the Contacts
list, the first line of the display shows Access Code:. The
second line of the display shows a blinking cursor. Enter the
access code and press
N to proceed.
6 The first line of the display shows Calling. The second line
of the display shows the subscriber alias or ID, and the
Phone Call icon.
7 If successful:
The DTMF tone sounds. You hear the dialing tone of the
telephone user. The first line of the display shows the
subscriber alias or ID, and the RSSI icon. The second line of
the display shows Phone Call and the Phone Call icon.
OR
If unsuccessful:
A tone sounds and the display shows Phone Call Failed.
Your radio returns to the Access Code input screen.
If the access code was preconfigured in the Contacts list,
the radio returns to the screen you were on prior to initiating
the call.
8 Press the PTT button to talk and release it to listen. The
RSSI icon disappears during transmission.
To enter extra digits, if requested by the Phone Call:
Press any keypad to begin the input of extra digits. The first
line of the display shows Extra Digits:. The second line
of the display shows a blinking cursor. Enter the extra digits
and press
N to proceed. The DTMF tone sounds and the
radio returns to the previous screen.
OR