Maytag MD 68 - Manual (Page 6)

5
U SING THE
C
ONTROLS
Sensor Dry – Automatically senses the moisture in the load
and shuts the dryer off when the selected dryness level (very
dry to damp dry) is reached.This cycle is recommended for
the majority of loads including delicates, wrinkle free and
cotton/sturdy items like towels, bedding and jeans.
Time Dry – May be selected for any load if Sensor Dry is
not used. Press the up or down arrow pad to select the
desired number of minutes.
Air Fluff – Provides tumbling in unheated air. Used for
freshening items. Press the up or down arrow pad to select
the desired number of minutes.
Wrinkle Release – Will release wrinkles from items that are
clean and dry but slightly wrinkled, such as from a crowded
closet or suitcase or from sitting in the dryer too long after
the end of the cycle. It provides 8 minutes of heated tumbling
and 10 minutes of cool down tumbling without heat.
There are four temperature settings. Press the arrow pad to
select regular, medium, low or extra low temperatures.
Regular – For sturdy cottons or those labeled “Tumble Dry.”
Medium – For permanent press, synthetics, lightweight
cottons or items labeled “Tumble Dry Medium.”
Low – For heat sensitive items labeled “Tumble Dry
Low” or “Tumble Dry Warm.”
Extra Low – Provides the lowest heated dry temperature
possible.
Press the arrow pad to select the desired dryness level.
Very Dry – Used to completely dry sturdy or bulky items
including towels and jeans.
More Dry – Uses slightly less time to dry than very dry with
similar results. May find some blue jean seams slightly damp.
Normal Dry – Used for drying the majority of loads.
Less Dry – Still provides the benefit of the load being slightly
damp, but items will dry faster once they are laid flat or hung dry.
Damp Dry – Designed to partially dry items. Used for items
that lay flat or hang to dry.
Step 1 Select a Cycle
Step 2 Select Sensor
Dry Level
Step 3 Select Temperature