Magellan 300GPS - Manual (Page 33)

29
Initializing the Receiver (EZSTART)
If you desire to re-initialize the receiver, (for example, you
have moved more than 300 miles since the last time the
receiver was turned on) you can do so in the SETUP menu.
Press
MENU
until SETUP is displayed at the top of the screen
and press
ENTER
. Use the RIGHT ARROW until SETUP
PRESS ENT TO EZSTRT is displayed. Press
ENTER
again
and the receiver prompts you to enter the necessary data.
SELECT REGION. Use the ARROW pad to change the
flashing text to select the appropriate region for your present
location. Press
ENTER
.
SELECT COUNTRY or STATE. Use the ARROW pad to
change the flashing text to select the country or state for your
present location.
Press
ENTER
.
ENTER ELEVATION. Use the ARROW pad to enter the
approximate elevation for your position. If unknown, leave
the elevation at 0. Press
ENTER
.
ENTER TIME. Use the ARROW pad to enter your present
time. Press
ENTER
.
ENTER DATE. Use the ARROW pad to enter the date.
Press
ENTER
.