3. mode switch settings, Tion 5-3 – Miller Electric XMT 400 User Manual
Page 26
Advertising
OM-217 769 Page 22
5-3. Mode Switch Settings
.
The SMAW modes provide the Adaptive Hot Start
™
feature, which automatically increases the output amperage at the start of a weld should the
start require it. This eliminates electrode sticking at arc start.
Mode
Output Control
Scratch Start TIG (GTAW)
Select:
or
Amp
Weld
Lift-Arc TIG
(GTAW)
Select:
or
Amp
Weld
TIG (GTAW) With
HF Unit,
Pulsing Device,
Or Remote Control
Select:
or
Amp
Requires:
Control
MIG (GMAW)
Select:
or
Volt
Requires:
Feeder
Pulsed MIG
(GMAW-P)
(Requires an
external
pulsing device.)
Select:
Volt
Requires:
Feeder or Control
Remote
Control SMAW
Select:
or
Amp
Requires:
Control
Panel Control
SMAW
Select:
or
Amp
Weld
Voltage-Sensing
Wirefeeder
Select:
or
Volt
Requires:
Feeder
Advertising