Philips Magnavox MDV460 - Manual (Page 10)

English
10
IMPORTANT!
– The progressive scan video quality
is only possible when using YPbPr
and a progressive scan television is
required.
Using Component Video jacks
(YPbPr)
A Use the component video cables (red/
blue/green) to connect the DVD player’s
YPbPr jacks to the component video
input jacks (or labeled as YPbPr) on the
television (cable not supplied).
B To hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to
the corresponding AUDIO IN jacks on
the television (cable supplied).
C Proceed to page 17 for detailed
progressive scan setup.
Connections
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
Connecting to television
IMPORTANT!
– You only need to make one video
connection from the following
options, depending on the
capabilities of your television.
– Connect the DVD player directly
to the television.
Using Composite Video jacks
(CVBS)
A Use the composite video cable (yellow)
to connect the DVD player’s TV OUT
(CVBS) jack to the video input jack (or
labeled as A/V In, Video In, Composite or
Baseband) on the television (cable
supplied).
B To hear sound of this DVD player
through your television, use the audio
cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to
the corresponding AUDIO IN jacks on
the television (cable supplied).
AUDIO OUT
DIGIT AL
OUT TV OUT
COAXIAL
AUDI O IN
V (Pr/Cr)
U (Pb/Cb )
Y
S-VIDE O
IN
VIDEO IN
COMPONENT VIDEO IN
AUDIO
OUT V (Pr/Cr) U (Pb/Cb ) Y
S-VIDEO IN
VIDEO IN
COMPONEN T VIDEO IN
2 1
COMPONENT VIDEO OUT COMPONENT VIDEO OUT
01-43_MDV460_37_eng2.indd 10 01-43_MDV460_37_eng2.indd 10 2007-01-26 9:52:23 AM 2007-01-26 9:52:23 AM