Moeller Marine EASY 600 - Manual (Page 11)

easy-soft makes programming particularly simple for the user. The graphics editor shows
the desired representation of the circuit diagram directly. Selection menus and drag- and
drop functions facilitate logic connections. Simply select and connect contacts and coils,
all at the click of a mouse button – and that’s it! You can choose the user-friendly menus
and texts provided by easy-soft in one of five languages.
The following types of display can be selected for viewing,
processing and printing out of your program:
• In accordance with IEC international Standards, with
contact and coil symbols
• With easy circuit configuration, 1:1 as shown in the easy
display window
• In accordance with the American Standard, ANSI
The built-in off-line simulation function enables the user to
test that the circuit functions properly before commissioning,
and without the module being connected. Notes alongside
contacts and coils create clarity. A cover sheet with your own
title block, various text boxes and cross-reference list with
comments, make your print-out into a professional piece of
documentation.
Easy needs no maintenance
Once the program is designed, it is stored in the easy in a
non-volatile fashion and retained there forever, or until the
next modification. There is no need for an auxiliary voltage
supply or a battery. In other words, these control relays
are utterly maintenance-free. It is not only circuits and
parameters that have to be safeguarded when there is
a power failure. Easy also remembers switch positions and
values. For example the actual reading on the hours-run
meter and other counters, as well as the time elapsed on the
timing relay are recorded and can continue to be processed
after the system is switched On again. easy series modules in
all rating classes offer this remanence.
easy Inputting
-Soft – The Convenient Way to
Input the Circuit Configuration
ea y s