Metra Electronics 95-2009 - Manual (Page 9)

9
95-2009 DASH DISASSEMBLY
1
Under glove box and drivers knee bol-
ster, remove (2) plastic panels by
turning (2) 1/4 turn fasteners per side.
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
3
Remove (6) 9/32" screws inside glove
box. 2
Remove (4) 9/32" screws revealed.
(2 per side). 4
Unsnap panel from driver's side to
passenger's side. 5
Remove (3) 9/32" screws to remove
radio. 6
Continue to kit assembly.
BUICK • SKYLARK 1996-1998