Memorex MCD4300BT - Manual (Page 17)

16
BASIC OPERATION (CONTINUED)
USING THE BASE PAGE BUTTON USING THE FLASH BUTTON
Press the PAGE button on the base to
locate all handsets when not in use; all
handsets will ring. Press again to end
the paging feature. Press any button
on the handset to end paging.
If none of the handsets pick up in two
minutes, the paging will stop.
1
Press the FLASH button to momentarily
hang up. This is useful for custom calling
features, such as Call Waiting or Three-
Way Calling provided by your local
phone company. When using for call
waiting, simply press to answer the call
waiting call. Press again to reconnect
with the original caller.
1
USING THE TONE BUTTON
If you are in a Pulse dialing area you
may still take advantage of touch-tone
services after dialing to respond to
touch-tone prompts. To do this, press
the */TONE button to temporarily
change the dialing mode from Pulse to
Tone after dialing in the Pulse mode.
This will enable Pulse users to access
touch-tone services. It will revert back
to Pulse after hanging up.
1
CALL WAITING
If you subscribe to Call Waiting through
your local phone company, and you
receive another phone call, the phone
will alert you with a beep and the display
will show the name and number. Simply
press the FLASH button to answer the
new call. Press the FLASH button again
to return to the original call. Call Waiting
Caller ID also needs to be subscribed to
in order to see the new caller’s name/
number on the display if you are already
on the phone.
1
TONE/PULSE SWITCH
Slide the T/P switch to TONE or PULSE
to match the service provided on your
telephone line. If you are not sure of your
service, please contact your telephone
company. The factory preset position for
this switch is TONE. 1
MCD4300BT.2002.O/M.QXD 4/19/02 9:57 AM Page 16