Memorex MP3123 - Manual (Page 10)

9
Press the SKIP/Search or
button ❶ to select the first track
that you wish to program. When
the desired track number
(Example: Track 5) appears in the
display, press the PROGRAM
button ❷ again. The display will
then show, “P:02” indicating
program 2 is ready to be set.
MP3: If using a MP3 disc, see
note below.
2
1
1
4
After programming up to 64 tracks
in the CD Program Memory,
press the PLAY/PAUSE (
)
button to begin programmed
playback; “PROG” will appear in
the display and playback will
begin on the first track that you
programmed. The player will
continue to play all of the tracks
that you programmed in the order
in which you programmed them.
5
When the last programmed track
has been played, the player will
stop. To cancel the Programmed
Playback mode, press the
PROGRAM button ❶ to enter the
Program mode and then press the
STOP (■) button ❷ to cancel.
1
2
6
NOTES ON PROGRAMMED PLAYBACK:
• MP3 PROGRAM: If an MP3 CD is inserted, you will first select the directory number in step 1, and then
the file.
• You can review the program by pressing the PROGRAM button when playback is stopped.
• You can change tracks in a program by simply selecting the desired track using the PROGRAM button,
and then use the SKIP/Search or button to change it.
• Press the STOP (■) button to stop the program before it is finished.
• Each file may be stored in the program memory as many times as desired (up to 64 files).
• You can scroll through the program while it is playing using the SKIP/Search
or button.
MP3123 O/M.QXD 7/26/02 10:00 AM Page 9