MaxTech XT5988 - Manual (Page 5)

4
• Attach the power cord to the monitor and plug it into an AC outlet.
• The monitor is now ready for use.
Section 3 - Monitor Controls and LEDs
1. Power Indicator:
LEDs A, B, and C (See Figure 3-1) indicate the operational state of the
monitor.
1.1 LEDs A, B and C are lit: The monitor is in normal operating
mode.
1.2 Only LEDs B and C are lit: The monitor is in the power saving
“SUSPEND” mode. In this mode the monitor uses only 25W. The
screen is blank.
1.3 Only LED C is lit: The monitor is in the power saving “OFF”
mode. The monitor is in minimum power state and uses only 5W.
The screen is blank.
1.4 All LEDs are off: The power switch is off.
2. Power Switch:
Turns the monitor on ( | ) or off ( O )
3. Brightness Control:
Adjusts the display brightness.
4. Contrast Control:
Adjusts the display contrast.
5. Degaussing Control
Press to clear color impurity of the display.
3 9 10 11 12 8 4 7 6
2
A
B
C
13
(on back)
1
5
Figure 3-1 Controls and LEDs