Morphy Richards Filter rapide kettle - Manual (Page 6)

Replacing your filter
cartridge
1 Take the top compartment (the cartridge
holder) out of the kettle by pulling the
cartridge holder easy release button
forward and lift upwards.
I
2 Remove the old cartridge by rotating it
anti-clockwise to unlock it. J
3 Remove the new cartridge from the
packet, place in a bowl of water and
shake.
4 Ensure the filter seal is in place. K
5 Insert the new cartridge into the top
compartment from the bottom and twist
clockwise to lock in place.
6 Replace the top compartment back into
the kettle and click into place.
7 Fill with tap water. Allow the water to
filter through the system. Discard the
water and repeat once more.
IMPORTANT : Only use Morphy
Richards cartridge filters. Telephone our
replacement parts helpline for assistance.
Cleaning
WARNING: Always disconnect the
plug from the mains and allow the
kettle to cool before cleaning.
Wipe the outside with a damp cloth.
IMPORTANT: Do not use abrasive
cleaners on the kettle which may scratch
the surface.
Helpline
If you have any difficulty with your
appliance, do not hesitate to call us. We’re
more likely to be able to help than the store
from where you bought it.
Please have the following information
ready to enable our staff to deal with your
query quickly:
• Name of the product
• Model number as shown on the
underside of the appliance.
6
I J
K
43550 Filter kettle Rev 5 21/3/05 3:03 PM Page 6