Melissa 235-002 - Manual (Page 10)

10 11
INTRODUCTION
To get the most out of your new hairdryer, please read
through these instructions carefully before using it for
the fi rst time. We also recommend that you keep the
instructions for future reference, so that you can remind
yourself of the functions of your hairdryer.
SAFETY MEASURES
Normal use of the hairdryer
• Incorrect use of the hairdryer may cause personal
injury and damage to the appliance.
• Use the hairdryer for its intended purpose only.
The manufacturer is not responsible for any injury
or damage resulting from incorrect use or handling
(see also Guarantee Terms).
• The hairdryer may only be connected to 230 V, 50
Hz.
• The hairdryer or cord must not be placed in water or
any other liquid.
• Never leave the hairdryer unattended when in use.
Children may only use the hairdryer under the
supervision of an adult.
• This hairdryer is not suitable for commercial or
outdoor use.
• When in use, the air intake on the back of the
hairdryer must not be blocked. If the air intake is
blocked, the hairdryer will overheat. If this happens,
the overheat protection will automatically shut off
power to the hairdryer. Turn off the hairdryer, and
remove the plug from the mains socket.
• The hairdryer must not be used without the rear fi lter
fi tted.
• Do not leave the hairdryer on clothes, bedding, etc.
made from synthetic materials, which are heat-
sensitive and easily combustible, while it is switched
on or still warm.
• Do not use the hairdryer in the vicinity of
combustible or explosive liquids or gases, for
example, in the vicinity of oxygen cylinders.
• In order to avoid burns, you should avoid blowing
hot air directly into the eyes or on very sensitive
skin.
Cord, plug and mains socket
• Check regularly that the cord and plug are not
damaged and do not use the hairdryer if they are, or
if it has been dropped or damaged in any other way.
• If the hairdryer, cord or plug is damaged, the
appliance must be inspected and, if necessary,
repaired by an authorised repair engineer, otherwise
there is a risk of electric shock. Never try to repair
the appliance yourself.
• Remove the plug from the socket before cleaning.
• Avoid pulling the cord when removing the plug from
the socket. Instead, hold the plug.
• The cord must not be wound around the appliance.
KEY
1. Ionisation button
2. Detachable rear fi lter
3. Cool shot button
4. Temperature control
5. Speed selector
6. Hanging loop
7. Styling comb
8. Air concentrator
9. Finger diffuser
PRIOR TO FIRST USE
Check that you have removed all packaging from your
hairdryer.
USE
• To switch on the hairdryer, set the speed selector (5)
to one of the two positions above “0” and select a
temperature setting using the temperature control
(4).
• The detachable air concentrator (8) and styling
comb (7) provide a concentrated air supply. Use the
fi nger diffuser (9) to concentrate the air in numerous
points over a wider area.
• If you press and hold the cool shot button (3), the
hairdryer blows out cool air. This is useful when your
hair is dry and needs to be set.
• To switch off the hairdryer, set the speed selector to
position “0”. The hairdryer can be hung up using the
loop (6) at the bottom of the handle.
• Set the ionisation button (1) to the “ON” position
to activate the ionic function. This prevents static
electricity in the hair and makes it soft and shiny.
Set the ionisation button to the “OFF” position to
deactivate the ionic function.
UK