Programming the coffee maker, Cleaning and maintenance – Magic Chef MCCM1TW12 User Manual

Page 8

Advertising
background image

8

NOTE: If the glass carafe was removed during the brewing cycle, return it

within 30 seconds or the filter basket may overflow.


Programming the Coffee Maker


Your coffee maker is equipped with a feature that will automatically brew at your
desired time within the next 24 hours.

1) Place your coffee maker on a flat, level surface, such as a countertop. Plug

the coffee maker into a 120_volt 60Hz AC only outlet.

2) Set the current time by pressing the “HOUR” and the “MINUTE” button.
3) To set the automatic timer, press and hold the “BREW” button and press the

“HOUR” and the “MINUTE” to the time that you want the coffee maker to
automatically start. Make sure you set the AM/PM correctly.

4) Follow steps 2-4 on the “Operating Instructions” and press the “START”

button only once. A red light will turn on next to the “AUTO” sign indicating
that the automatic timer has been activated.

5) Your coffee maker will now automatically brew at the programmed time.

Cleaning and Maintenance


COMPLETELY CLEAN AND DRY ALL PARTS AFTER EVERY USE.

Be sure to unplug the appliance before cleaning. To protect against electrical
shock, do not immerse cord, plug or unit in water or other liquid.

The glass carafe, carafe lid, and filter basket may be washed with warm soapy
water, or placed in the top rack of the dishwasher. Do not place any other part or
parts of your coffee maker in the dishwasher. The heating plate may be wiped
with a clean, damp cloth when necessary. Never use harsh or abrasive cleaners
on any part or parts of your coffee maker.

To clean the filter basket holder, first, remove from the main unit. To remove,
swing-open the filter basket holder completely and remove the filter basket and
the filter. Hold the bottom of the filter basket holder next to the hinge and lift and
pull away. Clean in warm soapy water. To reinsert the filter basket holder, insert
the top pin into the top hinge. While pressing the filter basket holder upwards
slightly, fit the bottom pin into the bottom hinge.

During cleaning of the filter basket, the spring (located lower back of the handle)
may become detached. If not reattached, it may prevent the anti-drip function
from working properly.

Advertising