Philips Magnavox 20MS3442/17 - Manual (Page 12)

You can set your TV to receive local TV chan-
nels (From an antenna) or Cable TV channels
(when you have Cable TV service). Then, use
Auto search to set up channels that are avail-
able for you. This makes it easy for you to se-
lect only the available TV stations when you
press CH+ or CH-. Before you start auto search,
connect the Antenna or Cable TV signal as
detailed on pages five and six; set TV/CATV
as described on page 11.
Add/Erase
F a v o r i t e l i s t
Add
2 Channel
Manual Up
TV TV/Cable
Auto search
Add/Erase
F a v o r i t e l i s t
Add
2 Channel
Manual Up
TV TV/CATV
Press MENU to see the menu.
Press CH+ or CH- repeatedly to
highlight Auto search.
Press VOL+ or VOL- to highlight
(Preset).
Press CH- to enter Preset submenu.
Press VOL+ to start programming TV
channels. Press the VOL- if you need
to stop channel programming during
the process.
When channel setup is completed, the
TV will go to its lowest channel.
Programming
P l e a s e W a i t
TV 2
Helpful Hints
Auto search
S t o p
Auto Search (Setting TV Channels)
12
Brightness
Contrast
Tint
Blue Back
C. Temp
50
50
50
On
Normal
Sharpness 50
Color 50
Press CH+ or CH- to see
which channels are in the
TV s memory. You can still
select non-memorized
channels using the Number
buttons on the remote
control.
To delete unwanted chan-
nels from the TV s memory
or to add more channels, see
ADD/ERASE on page 1
5.
You cannot select Preset
menu if the TV is set to
AV1/S- video, AV2, or YUV.
Press TV/AV repeatedly to
get to the TV channels.