Metra Electronics NISSAN MURANO 99-7426 - Manual (Page 7)

99-7426 KIT ASSEMBLY
5
DOUBLE DIN RADIO PROVISION
Cut and remove the center bar from
the radio housing. (Figure A) 1
Snap the Double DIN brackets to the
inside edge of the radio housing.
(Figure B) 2
Slide the Double DIN or ISO mount
unit(s) into the bracket/radio housing
assembly and secure the unit(s) to the
assembly using the screws supplied
with the unit(s). (Figure C) 3
Snap the Double DIN trim plate onto
the front of the radio/housing.
(Figure C) 4
Continue to final assembly.
* Note: Refer also to the instructions included with the aftermarket radio.
A
B
C
STACKED ISO MOUNT UNITS PROVISION