Miele G 2872 - Manual (Page 50)

Dealer
Demo modes are only for
showrooms.
The dishwasher has three demo
programs for showrooms.
The programs "Demo mode" and
"Endless demo mode" show the use
and function range of the dishwasher.
– Demo mode:
The program is started by pressing
any button. It runs once and must be
started again.
– Endless demo mode:
The program starts as soon as it is
activated and runs in a loop until it is
turned off.
– Demo wash sound:
The program activates the pumps to
demonstrate the wash sound.
– Trade show mode:
Once the machine is used for the
first time this option is disabled in the
display.
– Demo Drying Plus:
The door opens automatically.
Turning the demo mode on
^ Select the desired option, confirm
with OK.
^ Confirm the following messages with
OK.
^ Press any button to start the selected
demo mode.
^ To cancel the demo mode press any
button again and confirm with OK.
Turning the demo mode off
^ Select Off to deactivate the demo
mode and confirm with OK.
^ Confirm the message Deactivate
demo mode? with OK.
Factory default
All settings can be reset to factory
default.
^ Confirm the message Reset to factory
default? with OK.
^ Confirm the information All settings
are reset to factory default with OK.
Leaving the "Settings
J menu"
To leave the "Settings
J" touch the
"Clear" control. The main menu shows.
Settings
!
50