Motorola V260/V262 - Manual (Page 13)

11
G
e
tting
Starte
d
Charging the Battery
New batteries are shipped partially charged. Before
you can use your phone, you need to install and charge
the battery as described below. Some batteries
perform best after several full charge/discharge cycles.
Tip: You can safely leave the travel charger connected to
the phone after charging is complete. This will not damage
the battery.
Note: When you charge the battery, the battery level
indicator in the upper right corner of the display shows how
much of the charging process is complete. At least 1
segment of the battery level indicator must be visible to
ensure full phone functionality while charging.
Action
1 Plug the travel
charger into your
phone with the
release tab facing
up.
2 Plug the other end of the travel charger into the
appropriate electrical outlet.
3 When your phone indicates Charge Complete, press
the release tab and remove the travel charger.