Philips Magnavox ZV427MG9 A - Manual (Page 28)

26 EN 26 EN
1 Press [SETUP] and use [K / L] to
select “General Setting”, then press
[OK].
“General Setting” menu will appear.
2 Use [K / L] to select “Clock”, then
press [OK].
“Clock Setting” menu will appear.
Note
• Your setting will be canceled if you press [SETUP] before pressing [OK] at step 3.
• Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30
seconds when you set the clock manually.
• For setting the day, year, hour, and minute, [the Number buttons] can also be used.
• You can set the built-in calendar from the year 2008 up to 2058.
SETTING THE CLOCK
Set the clock before you try the timer programming. Follow these steps below.
3 Use [{ / B] to select an item to set,
and use [K / L] to select the contents
to suit your preference, then press
[OK] when you finish setting all the
contents.
Clock Setting
JAN / 01 / 2009 ( THU )
12 : 00 AM
Your setting will be activated.
The clock start counting when you press [OK].
4 Press [SETUP] to exit.
E9P8BUD_ZV427MG9_v1.indd 26 E9P8BUD_ZV427MG9_v1.indd 26 2009/02/18 14:29:02 2009/02/18 14:29:02