M-AUDIO NVR10 - Manual (Page 3)

2 NVR10
|
Quick Start Guide
If you do not have internet access, you can install the drivers packaged with the NRV10 by inserting the included
FireWire Series CD-ROM into your computer’s CD drive. Your computer will automatically display the interactive
install screen . (If the screen does not appear, you can manually start it by clicking on Start > My Computer >
FireWire Series CD-ROM.) Select your product from the menu and click “install.”
2. Follow the driver installer’s on-screen instructions.
3. At various points during the installation process,
you may be notified that the driver being
installed has not passed Windows Logo Testing.
Click “Continue Anyway” to proceed with the
installation.
4. Once the installer has completed, click “Finish.”
5. Shut down your computer.
6. Connect the NRV10 to a power outlet and to an
available FireWire port on your computer.
7. Power on the NRV10, then start your computer.