Start the program 11, At the end of a program 11, Start the program 7. at the end of a program – Miele T1322C User Manual
Page 11: Using the dryer, Start the program, At the end of a program
Advertising
6. Start the program
^ Press the "Start/Stop" button.
Once the program starts, the current
cycle of the program will be indicated
in the "STATUS" display.
7. At the end of a program
The "Anti-crease/End" indicator will light
at the end of a program and the buzzer
will sound if it was selected.
If a fault occurred, a "FAULT" indicator
will light. See "Frequently asked
questions" for details.
^ Press the "Door" button.
^ Open the door.
^ Remove the laundry.
^ Check that the drum is empty.
^ Clean the lint filter after each use
(see "Dryer care").
^ Close the door.
^ Press the "On/Off" button to turn off
the dryer.
^ Empty the condensed water
container weekly (if not connected to
a drain).
Using the dryer
11
Advertising