Minolta IP8815 - Manual (Page 24)

IP8815 Nortel IP Phone
User Guide
19 Jan. ‘09
continue the session or press the Settings ( ) button to exit the configuration session.
5.6.5. Date Format
The format of the LCD date displays in the one of the formats below:
- MM/DD (01/22)
- DD/MM (22/01)
- DD Month (22 Jan)
- Month DD (Jan 22)
- Disabled, no date display
To set the date display format:
o Press the Setting ( ) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the
OK softkey.
o Dial 6, or move the cursor to 6.Time Configuration using the Previous-Next softkeys and press
the
OK softkey.
o Dial 5, or move the cursor to
5.Date Format
using the
Previous-Next softkeys and press the OK
softkey.
o Press the
Previous-Next softkeys to select the display format
and press the OK softkey to save your entry. An asterisk, »,
displays in front of the current setting.
o Move to another parameter with the Return button, , and
continue the session or press the Settings ( ) button to exit
the configuration session.
5.7. Lock Outgoing Call
The IP Phone can be configured to allow outgoing calls only if a password is entered. When enabled, the
LCD screen will display the password request and the lock icon as shown. In this mode, the password
must be entered prior to placing an outgoing call.
To activate this feature, the LCD password must be set, consult your system administrator to set the LCD
password.
To enable/disable the Lock Outgoing Call feature:
o Press the Setting ( ) button.
o Dial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the
OK softkey.
o Dial 8, or move cursor to 8.Lock Outgoing Call using the Previous-Next softkeys and press the
OK softkey.
Enter Password
Jan 23 08:30
Å Change OK
Date Format
*month/DD (Jan 23)
Jan 23 08:30
Previous Next OK