Miele H4742BP - Manual (Page 11)

Triangle
V in the display
When a control is touched, the
symbols of functions which can be
altered will light up in the display.
These will vary depending on program.
Touch the "
V" or "W" control repeatedly
until triangle
V is underneath the
symbol of the required function.
Then select the function using the "OK"
control.
Triangle
V will flash for approx.
15 seconds.
You can only make entries with the
"
V" or "W" controls while the triangle
V is flashing.
If the triangle has stopped flashing,
you will need to select the function
again with the "OK" control.
The following will change each time "
V"
or "
W" is touched
– Duration "
T" and End time "S" in
increments of a minute,
– the Timer "
N" at first in increments of
5 seconds and then in increments of
a minute.
Touching the control for longer, speeds
up the change in the display.
325
6 m T S
V
Guide to the display
11