9front control panel, System reset, Power/timer indicator – MITSUBISHI ELECTRIC WS-65517 User Manual

Page 9: A/v reset procedure, Input 3, Ieee 1394

Advertising
background image

9

Front Control Panel

SYSTEM RESET

If the TV will not respond to either the remote control or the front panel controls and/or will not power Off, press the
SYSTEM RESET button with a pointed item like the end point of a paperclip. The TV will turn Off and the TIMER

light will flash quickly for about one minute. When the TIMER light stops flashing, you may turn on the TV again.

Changes you made the last time the TV was On before you used the SYSTEM RESET button may be lost, however,
the changes you made previously are not lost.

POWER/TIMER Indicator

The green light is a multi-function indicator. This light will flash rapidly for about one minute each time the TV is

plugged into the wall electrical outlet, when power is restored after a power failure, or using the SYSTEM RESET
button. Do not attempt to turn on the TV again during this period. Wait for the flashing to stop and the light to
turn off, before attempting to turn the TV on. While the TV is powered on, the light illuminates steadily. If the TV
has been programmed to turn on automatically using the Timer feature, this light will flash slowly when the TV is
powered off.

A/V RESET Procedure

There may be times when you wish to reset the A/V (Audio and Video) settings back to the factory defaults. To do

this for an individual setting, use the Audio or Video remote control button. To return all of the settings at once,
press GUIDE and FORMAT on the front panel at the same time, or use the A/V Memory Reset selection on the

AudioVideo menu (page 68).

INPUT 3

This input can be used for convenient connection of a camcorder or other video device to the TV. If you connect to

the S-VIDEO terminal, the VIDEO terminal is deactivated. The VIDEO terminal is available when there is no S-Video
connection.

IEEE 1394

This IEEE 1394 (FireWire®) input/output allows for temporary connection of IEEE 1394 devices such as MPEG 2

camcorders or compatible hard disc drives to the front of the TV. This connection works the same way as the two rear
IEEE 1394 connections.

Except for SYSTEM RESET and TIMER, all of the buttons on the Front Control Panel (highlighted in gray) are
duplicated on the remote control. The top row of labels show the control functions when there are no TV menus
displayed on the screen. The bottom row of labels show the control functions when the TV menus are displayed on
the screen or when a special function has been activated. See Remote Control Overview page 29, for further details
on the functions of these buttons. TIMER is also accessible through the menu screens. Pressing MENU on the front
panel will display the TV menu.

DEVICE

CANCEL

MENU

ENTER

MENU

FORMAT

CH

VOL

POWER

SYSTEM

RESET

TIMER

ADJUST

ADJUST

Front Panel WS-55517, WS-65517, WS-73517

GUIDE

INPUT-3

S-VIDEO

VIDEO L-AUDIO-R

IEEE 1394

Advertising
This manual is related to the following products: