MTD E640F - Manual (Page 5)

5
SECTION 4: CONTENTS OF HARDWARE PACK
Lay out the hardware according to the illustration for identification purposes. Part numbers are shown in parentheses.
(Hardware pack may contain extra items which are not used on your unit.)
A
ATTACHING THE HANDLES
Hex Bolts (A)
(710-3180)
Handle Tabs
(784-5599)
Hex Bolts
(710-3008)
Lock Washers
(736-0119)
Carriage Bolts
(710-0262)
Cupped Washers
(736-0242)
B
ATTACHING THE CHUTE ASSEMBLY
Hex Bolts
(710-3015)
Chute Flange
(731-0851)
Keepers
Hex Lock Nuts
ATTACHING THE CHUTE CRANK ASSEMBLY
C
Flat Washers
(736-0185)
Hair Pin Clip
(714-0104)
Hex Nut
(712-3010)
Lock Washers
(736-0119)
Hex Bolt
(710-0442)
5/16-18 x 1-3/4” Long
5/16-18 x 3/4” Long
5/16” I.D.
5/16-18 x 1-1/2” Long
5/16” I.D.
5/16” Thread
1/4-20 x 3/4” Long
1/4-20 Thread
(712-3027)
3/8” I.D. x 5/8” O.D.
5/16” I.D.
5/16” Thread
D
ATTACHING THE SHIFT ROD
AND CLUTCH CABLES
Ferrule
(711-0677)
3/8” I.D. x 5/8” O.D.
Flat Washers
(736-0185)
Hair Pin Clip
(714-0104)
F AUGER SHEAR BOLTS (SPARES)
Shear Bolts
(710-0890A)
(712-0429)
Hex Lock Nuts
5/16” Thread
5/16-18 x 1-1/2” Long
Hex Nuts
(712-3010)
Note: Parts are not to actual size.