Master Bilt 20150613 - Manual (Page 14)

ASSEMBLY
STEP 14
Attach temperature gauge (2g)
and temperature gauge base (2b)
to grill lid (1) using wing nut.
1
WING NUT
13
STEP 15
Place bakelite spacer (F) on grill
lid (1). Attach handle (27)
using washers (J) and screws (D)
as shown.
Make sure lid handle (27) is slop-
ing downward as shown in
FIGURE 2.
The bakelite spacers (F) should
be angled down and slightly
outward with the larger side of
the spacers going to grill lid and
the smaller side attached to the
handle.
1
27
2g 2b
F
D
J
FIGURE 2
27
*Note: Wing nut is packaged
with temperature gauge.
Tip:
Make sure the temperature
readings and Masterbuilt logo
in the gauge are aligned cor-
rectly before tightening down
the wing nut.