Monster Cable PERFECTVIEW 400S - Manual (Page 12)

8
Installing the FlatScreen Mount
Remove all pieces of the FlatScreen Mount system
to ensure you have all necessary parts.
Be sure to choose a mounting location with easy
access to an AC power outlet.
Wood Stud Mounting:
Using an electronic stud sensor, locate a wall stud
at your desired mounting location.
�����
�����
With the help of a friend, position the wall
plate over wall stud. Using the provided level, confi rm
that the wall plate is plumb or vertically straight. For
best results, position the level horizontally with the
narrow end fl ush against the side of the wall plate.
Hold the plate fi rmly in place.
Mark the stud center in the top and bottom mounting
holes with a pencil.
With your electrical drill and 3/16" bit, pre-drill
a 3" deep hole at each mark.
Attach the wall plate to the wall using the supplied
lag bolts and round washers, as shown to the right.
Tighten each bolt with your electric drill or socket
wrench. Turn clockwise until secure.
DO NOT over tighten bolts. This can damage
the wall plate or the surface of your wall.
1)
2)
3)
4)
5)