Memorex MB2054 - Manual (Page 5)

4
POWER SOURCE
BATTERY INSTALLATION
Open the battery compartment by sliding it out and then up (the
battery compartment is designed to stay attached so it cannot be
lost). Insert two (2) "AAA" size batteries (not included) following
the polarity diagram. Put the battery compartment cover back
into place.
BATTERY INDICATORS:
: The batteries are fresh.
: The batteries are weak or dead, replace.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the
battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old
batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture. (Follow battery manufacturer’s directions.)
+
—
+
—
MB2054 O/M.QXD 8/12/02 11:16 AM Page 4